MultiCam Black – Get Tactical Supply

Ferro Concepts PVS-31 Battery Retention System

Brian — Wed, 14 May 2025 13:43:10 +0000

https://youtu.be/p1OImB2d4hk?si=OLFItesqvtr8S43T The Ferro Concepts PVS-31 Battery Retention System provides a way to securely secure a PVS-31 battery pack to a helmet safely. The mounting system is secured utilizing features already found on most helmets. The battery pack is held in a sleeve that is affixed to the helmet with Velcro and can be retained by three anchors. Two lateral anchors attach to the helmet with chin strap bolts or by being looped through accessory rails. The optional third anchor is a firm bridge to an IR Strobe mount that can be adjusted and affixed to the top of the helmet with Velcro. Tie-points at the front of the mount can be used to attach a strobe lanyard and secure the system at the front of the helmet as well.

Compatible with a variety of ballistic/bump helmets
Dual anchor points for battery pack retention
Additional tie-points for cable management
Adjustable bridge with strobe mount
Fits PVS-31 and GPNVG Battery Packs
Made in the U.S.A.

Spiritus Systems SACK Pouch Mk3

Brian — Thu, 24 Apr 2025 14:59:48 +0000

The Spiritus Systems Sub Abdominal Carrying Kit or "SACK" is the most versatile tactical "fanny pack" on the market. It was designed to make critical equipment easy to access from both sides or when in a confined space like a vehicle. The pouch features a half zip design, which means that your equipment will not easily fall out of the pouch even if the zipper is left unsecured. The front of the pouch features a small zippered stash pocket that is perfect for easy access to small items. The bottom of the pouch features two elastic loops that can be adjusted to hold a Tourniquet or other equipment that you may need to rapidly deploy. If bottom carry doesn't fit your mission needs, you can easily remove and reinstall the loops as necessary. The inside features soft loop on both sides. This makes the pouch very dynamic, giving you the ability to use our Pouch Insert Suite to fit your requirements. It also features two slide-locks that make it easy to adjust the tension of the elastic loops hanging below, as well as two tie-down loops for securing sensitive equipment. The two grommet holes on the bottom aid with drainage of the pouch if submersion occurs. The Spiritus Systems SACK is designed to fit onto the bottom of our Micro Fight Chest Rig, LV-119 Plate Carrier, or any other rig that accommodates standard hook and loop, making it a versatile choice for those changing loadouts often. Simply pull this off one kit and add it to another. Hook & loop Attachment measures 7"x 4"

Spiritus Systems Small General Purpose Pouch

Brian — Wed, 16 Apr 2025 14:19:08 +0000

The Spiritus Systems Small GP Pouch features a front pocket for storing items like VS-17 panels or SSE bags. The pouch is built with extra depth to store Night Vision Goggles and has been successfully test-fitted with 15s, 31s, and DTNVGS. The pouch is constructed out of high-quality 500D Cordura nylon. The inside of the pouch is lined with a loop and accepts our Pouch Insert Suite. The Spiritus Systems Small GP Pouch is designed to mount to MOLLE or Belt Systems. For MOLLE, the pouch consumes 3 Columns. For Belts, it has a pass-through that can accommodate 2" wide belts. Dimensions (Approximate) Height 5.5" x Width 5.5" x Depth 3"

Spiritus Systems SPUD Pouch

Brian — Wed, 16 Apr 2025 13:53:34 +0000

The Spiritus Systems SPUD pouch is built to hold pretty much anything. Spiritus Systems has taken the traditional, open-top, general-purpose pouch and thoroughly re-worked it to give it a big bump in versatility. The Spiritus Systems SPUD pouch can carry one, two, and even three 5.56 magazines, up to two 7.62 magazines, AK-47 magazines, 6.8 mags, smoke grenades, small radios, 16-oz Water Bottles, and more! - The rim of the pouch is lined with an adjustable shock cord loop to keep the contents secure and slip-free even if they are significantly smaller than the pouch itself. - The top of the pouch features both hook & loop and pull tabs so you can choose between the included scrim cover or an adjustable shock cord flap. - Both options are included with every SPUD pouch. The scrim cover, when pulled tight will wrap around any irregular shapes and keep the user’s kit fully locked into the pouch while still maintaining full coverage. - The whole system takes up two columns of MOLLE and can be mounted pretty much anywhere.

Edgar Sherman Design Padded Sling

Brian — Tue, 08 Apr 2025 20:44:52 +0000

Edgar Sherman Design Padded Rifle Sling maintains key features of the standard ESD Rifle Sling, like the pull tab and super smooth quick-adjust system, while adding a 0.25” thick pad for extra comfort.

Esstac Handcuff KYWI Pouch

Brian — Wed, 05 Mar 2025 15:34:36 +0000

These are NOT Compatible with ASP handcuffs due to their size. The Esstac handcuff pouch was designed for a Federal Agency that needed an open-top cuff pouch with retention. It comes with two inserts; the end user needs to try both and see which works best with their cuffs. The Handcuff Kywi was designed around Smith and Wesson M-301 (hinged) cuffs and Peerless 700C (chain) cuffs. It is compatible with similar other makes/models, however, it IS NOT COMPATIBLE with ASP handcuffs due to their size, we've told yah twice!

Agilite AG1™ – Single Magazine Pouch

Brian — Tue, 25 Feb 2025 16:12:59 +0000

https://youtu.be/3tnNAb1cq8U?si=YNii44H1YDyH-qf7 The Agilite AG Mag Pouches are bungee retention pouches designed for effortless magazine access. They allow for swift and easy magazine extraction or reinsertion with a single hand, eliminating the obstruction caused by conventional bungee retention tabs. The Bungee retention magazine pouches have been a staple for over a decade, praised for their secure magazine retention. However, they suffer from a persistent usability issue. Retrieving or replacing a magazine becomes a cumbersome, two-handed process because the magazine often gets snagged on the bungee tabs. The Agilite pouches address this longstanding problem. They provide HALO jump-level retention while enabling a seamless transition from safety off to magazine draw, magazine re-insertion, and back, all without detaching your dominant hand from your weapon. The custom-polymer pull tabs facilitate both mechanical and frictional grip, ensuring a secure hold, whether wearing gloves or not.

Agilite Amap III Assault Pack

Brian — Tue, 25 Feb 2025 16:12:37 +0000

• 500D CORDURA® Brand Mil Spec Nylon
• Mil Spec polymer buckles and hardware
• YKK Zippers
• Velcro® Brand mounting platform
• Min Volume 4 liters, max volume 18 Liters + additional 8 Liter Beavertail compartment
• Laser-cut Velcro MOLLE overlay panels
• Hook and loop rear panel dimensions: 25cm * 9cm (9.8″ x 3.5″)
• Triple Density Fusion Foam shoulder and rear comfort padding
• Weight: 2.13lbs (0.96kg)

Dimensions
– Height: 15.7″ (40cm)
– Width: 11″ (28cm)
– Depth: 7.8″ (20cm)

Details
• Most Versatile and Universal Assault Pack on the market
• Crossover EDC pack for additional daily use
• Designed, Tested & Battle-Proven in Israel
• Can be used with shoulder straps or directly attaches to Plate Carriers
• Compatible with Swift Clip placard and chest rigs to add additional carrying capacity.
• Advanced new proprietary beavertail design for carrying helmets, clothing, and other gear.
• Goes from flat and low profile (4 Liters) to fully expanded (14 liters) capacity in seconds, with an additional 8 Liters of beavertail space as well as other external carrying capabilities.
• Beavertail becomes an additional admin pocket
• Detachable shoulder straps
• Directly attaches to Non-Agilite plate carriers using the AMAP III Conversion Kit (sold Separately)
• Side and underside additional carrying capability for safely attaching clothing, sleeping bags, sniper mats etc.
• Low profile design for use in CQB, Rotary, or vehicle-based ops
• Zipper admin pouch for smaller items.
• Triple Layer Fusion Foam padding and rear airflow channel for extreme comfort
• Designated hydration compartment
• Optional EDC insert set for laptops and other EDC items.
• Full clamshell opening and full Velcro® interior to attach hook pouches
• Built-in ports for Hydration and Comms tubes and cables
• Left and right exit ports for radio antennas and longer items
• Agilite K-Series™ Compatible

Agilite K19™ Plate Carrier 3.0

Brian — Fri, 31 Jan 2025 03:48:52 +0000

The Agilite K19 Plate Carrier is the most comfortable plate carrier on the market. Designed, tested, and battle-proven in Israel and behind enemy lines with some of the IDF's most elite units. The K19 has a one-size-fits-all cummerbund and multi-size plate bag absolving the need to make complicated and risky sizing choices when buying. The Plate Carrier employs our Egress™ Quick-release system and proprietary Fast-Adjust™ Cummerbund that can be adjusted and fine-tuned in real time by the tactical operator. The ability to adjust it yourself, on the fly, is critical to avoid unnecessary fatigue and compromised combat awareness. The K19 is also placard-compatible, with both upper attachment points and a new laser-cut loop overlay. It allows you to either add velcro-backed placards instantly, or use the mil spec, bartacked molle underneath to attach regular molle pouches. Both left and right quick-detach buckles are removable so that you can replace them with minimalist slide buckles (included) for an even lower profile, better for shouldering your rifle. The rear of the K19 plate bags has a triple layer of low-profile fusion foam to remain comfortable even when using the K19 with hard steel or ceramic armor plates (no need for a plate backer). The K19 is compatible with the AMAP III Assault pack, so you can attach it directly in seconds. No threading MOLLE, no hassle. The K19 Plate Carrier has traveled many miles and has crossed borders into some of the most dangerous places in the world to bring you one of the most detailed and thought-out plate carriers on earth.

Haley Strategic Partners X Chest Rig

Brian — Wed, 24 Jul 2024 03:25:44 +0000

https://youtu.be/fzY5JTyiMEw?si=LzDMtTKvW9byUZLl When run as a standalone platform, the X Chest Rig maintains a low profile capable of being worn fully loaded under a normal/loose fit jacket or sweatshirt without overtly printing. When run on an armor platform with a quick-release system, the chest rig can be attached or stowed in seconds, giving the end user the versatility to transition from low vis to high vis or vice versa. The four integrated magazine pouches were dimensioned for carriage of 5.56x45, 5.45x39, and 7.62x35 magazines utilizing the adjustable shock cord and pull-tab retention system for secure storage. The back of the integrated magazine pouches also features nylon webbing for the addition of MP2 Inserts (sold separately). MP2 Inserts provide secure retention of nearly all rifle magazines without the need for bungee cords, buckles, or hook and loop flaps. The X Chest Rig features four center-mounted utility pouches constructed with elastic for streamlined carriage of pistol magazines, flashlights, utility tools, or 37mm/40mm grenades. The front of the chest rig features two VELCRO® Brand hook and loop closure admin pouches for storage of smaller equipment such as compasses, GPS, laser range finders, and similar-sized items. The back panel of the X Chest Rig includes a full field of VELCRO® Brand hook for secure attachment to plate carriers when run as a placard. The Large Chest Rig Pad (sold separately) can be added when operating under heavier loadouts. The hook backer is also cross-compatible with all Wedge Expansion System products (sold separately), including the Double Rifle Mag Wedge, Holster Wedge, Admin Wedge, and 6.25" Shears Wedge, creating a highly modular platform capable of scaling to meet a multitude of mission requirements. The X-Harness comes standard on all Haley Strategic Chest Rigs and provides load-bearing comfort across a wide variety of body shapes and sizes. The slip loop shoulder strap system enables users to quickly don/doff any chest rig or placard. The X-Harness includes a waist strap (“belly band” or “back strap”) as well as 1 Column with 3 Rows of MOLLE webbing on both shoulder straps for cable management of radios, PTTs, hydration tubes, compasses, EUD bridges, GPS, and other similarly sized items. The X Chest Rig was disruptively engineered for direct integration with the Side Saddles, Multi-Mission Hanger, FlatPack, and FlatPack Plus (no additional accessories required), providing operators the ability to expand and customize their kit to meet any mission requirement. Note: The X Chest Rig is compatible with most industry standard plate carriers that can be outfitted with 1” ITW Nexus female buckles, including Spiritus Systems (LV119 Covert and LV119 OVERT), Ferro Concepts (FCPC v5 and Slickster), Velocity Systems (Scarab LT), Shaw Concepts (ARC v2), and Defense Mechanisms (Mission Essential Plate Carrier). Harnesses, Chest Rig Pads, and Accessories are sold separately