MultiCam Tropic – Get Tactical Supply

Spiritus Systems SACK Pouch Mk3

Brian — Thu, 24 Apr 2025 14:59:48 +0000

The Spiritus Systems Sub Abdominal Carrying Kit or "SACK" is the most versatile tactical "fanny pack" on the market. It was designed to make critical equipment easy to access from both sides or when in a confined space like a vehicle. The pouch features a half zip design, which means that your equipment will not easily fall out of the pouch even if the zipper is left unsecured. The front of the pouch features a small zippered stash pocket that is perfect for easy access to small items. The bottom of the pouch features two elastic loops that can be adjusted to hold a Tourniquet or other equipment that you may need to rapidly deploy. If bottom carry doesn't fit your mission needs, you can easily remove and reinstall the loops as necessary. The inside features soft loop on both sides. This makes the pouch very dynamic, giving you the ability to use our Pouch Insert Suite to fit your requirements. It also features two slide-locks that make it easy to adjust the tension of the elastic loops hanging below, as well as two tie-down loops for securing sensitive equipment. The two grommet holes on the bottom aid with drainage of the pouch if submersion occurs. The Spiritus Systems SACK is designed to fit onto the bottom of our Micro Fight Chest Rig, LV-119 Plate Carrier, or any other rig that accommodates standard hook and loop, making it a versatile choice for those changing loadouts often. Simply pull this off one kit and add it to another. Hook & loop Attachment measures 7"x 4"

Spiritus Systems Small General Purpose Pouch

Brian — Wed, 16 Apr 2025 14:19:08 +0000

The Spiritus Systems Small GP Pouch features a front pocket for storing items like VS-17 panels or SSE bags. The pouch is built with extra depth to store Night Vision Goggles and has been successfully test-fitted with 15s, 31s, and DTNVGS. The pouch is constructed out of high-quality 500D Cordura nylon. The inside of the pouch is lined with a loop and accepts our Pouch Insert Suite. The Spiritus Systems Small GP Pouch is designed to mount to MOLLE or Belt Systems. For MOLLE, the pouch consumes 3 Columns. For Belts, it has a pass-through that can accommodate 2" wide belts. Dimensions (Approximate) Height 5.5" x Width 5.5" x Depth 3"

Spiritus Systems SPUD Pouch

Brian — Wed, 16 Apr 2025 13:53:34 +0000

The Spiritus Systems SPUD pouch is built to hold pretty much anything. Spiritus Systems has taken the traditional, open-top, general-purpose pouch and thoroughly re-worked it to give it a big bump in versatility. The Spiritus Systems SPUD pouch can carry one, two, and even three 5.56 magazines, up to two 7.62 magazines, AK-47 magazines, 6.8 mags, smoke grenades, small radios, 16-oz Water Bottles, and more! - The rim of the pouch is lined with an adjustable shock cord loop to keep the contents secure and slip-free even if they are significantly smaller than the pouch itself. - The top of the pouch features both hook & loop and pull tabs so you can choose between the included scrim cover or an adjustable shock cord flap. - Both options are included with every SPUD pouch. The scrim cover, when pulled tight will wrap around any irregular shapes and keep the user’s kit fully locked into the pouch while still maintaining full coverage. - The whole system takes up two columns of MOLLE and can be mounted pretty much anywhere.

Haley Strategic Partners X Chest Rig

Brian — Wed, 24 Jul 2024 03:25:44 +0000

https://youtu.be/fzY5JTyiMEw?si=LzDMtTKvW9byUZLl When run as a standalone platform, the X Chest Rig maintains a low profile capable of being worn fully loaded under a normal/loose fit jacket or sweatshirt without overtly printing. When run on an armor platform with a quick-release system, the chest rig can be attached or stowed in seconds, giving the end user the versatility to transition from low vis to high vis or vice versa. The four integrated magazine pouches were dimensioned for carriage of 5.56x45, 5.45x39, and 7.62x35 magazines utilizing the adjustable shock cord and pull-tab retention system for secure storage. The back of the integrated magazine pouches also features nylon webbing for the addition of MP2 Inserts (sold separately). MP2 Inserts provide secure retention of nearly all rifle magazines without the need for bungee cords, buckles, or hook and loop flaps. The X Chest Rig features four center-mounted utility pouches constructed with elastic for streamlined carriage of pistol magazines, flashlights, utility tools, or 37mm/40mm grenades. The front of the chest rig features two VELCRO® Brand hook and loop closure admin pouches for storage of smaller equipment such as compasses, GPS, laser range finders, and similar-sized items. The back panel of the X Chest Rig includes a full field of VELCRO® Brand hook for secure attachment to plate carriers when run as a placard. The Large Chest Rig Pad (sold separately) can be added when operating under heavier loadouts. The hook backer is also cross-compatible with all Wedge Expansion System products (sold separately), including the Double Rifle Mag Wedge, Holster Wedge, Admin Wedge, and 6.25" Shears Wedge, creating a highly modular platform capable of scaling to meet a multitude of mission requirements. The X-Harness comes standard on all Haley Strategic Chest Rigs and provides load-bearing comfort across a wide variety of body shapes and sizes. The slip loop shoulder strap system enables users to quickly don/doff any chest rig or placard. The X-Harness includes a waist strap (“belly band” or “back strap”) as well as 1 Column with 3 Rows of MOLLE webbing on both shoulder straps for cable management of radios, PTTs, hydration tubes, compasses, EUD bridges, GPS, and other similarly sized items. The X Chest Rig was disruptively engineered for direct integration with the Side Saddles, Multi-Mission Hanger, FlatPack, and FlatPack Plus (no additional accessories required), providing operators the ability to expand and customize their kit to meet any mission requirement. Note: The X Chest Rig is compatible with most industry standard plate carriers that can be outfitted with 1” ITW Nexus female buckles, including Spiritus Systems (LV119 Covert and LV119 OVERT), Ferro Concepts (FCPC v5 and Slickster), Velocity Systems (Scarab LT), Shaw Concepts (ARC v2), and Defense Mechanisms (Mission Essential Plate Carrier). Harnesses, Chest Rig Pads, and Accessories are sold separately

Haley Strategic Partners FlatPack 2.0

Brian — Wed, 24 Jul 2024 02:35:09 +0000

The FlatPack Plus provides a slightly larger capacity than the FlatPack. The main zippered compartment features a full peel-open design for rapid access and visual identification of essential equipment. The interior of the main compartment utilizes the VELCRO® Brand loop on the front and rear interior panels to secure the suite of FlatPack Accessories (sold separately) including Small Clear Top Bags, Large Clear Top Bags, Garment Bags, and other hook-fastened accessories (Single Micro-Utility, Double Micro-Utility, Double Mag Wedge, Holster Wedge, etc.). The main zippered compartment also features an interior zippered hydration/armor compartment designed for carriage of the FlatPack Plus Level IIIA Armor Inserts (Hard Armor and Soft Armor sold separately) as well as 1-litre hydration bladders utilizing the comms/hydration ports. The front of the FlatPack Plus includes a VELCRO® Brand loop field for signal/ID/patches attachment.

A second full-depth zippered compartment is in front of the main zippered compartment providing additional storage and was also dimensioned for carriage of the FlatPack Plus Level IIIA Armor Inserts (Hard Armor and Soft Armor sold separately). A third, admin zippered compartment, is located at the bottom of the pack to store smaller items. The FlatPack Plus includes a chest strap to add stability and comfort while under load as well as comms/hydration loops on the shoulder straps, and grommets at the bottom of the main compartment for drainage when operating in wet/humid conditions. If operating under heavier loadouts, the FlatPack Back Pad and FlatPack Shoulder Pads can be added for additional comfort (sold separately).

The FlatPack and FlatPack Plus were disruptively engineered to directly integrate with all Haley Strategic Chest Rigs and Placards (Micro Chest Rig, X Chest Rig, Heavy Chest Rig, TRMP Chest Rig, and MOLLE Placard Chest Rig) by removing the shoulder straps and replacing the chest rig harness with the provided FlatPack Side Straps. The back of the FlatPack features MOLLE/PALS webbing for secure attachment to plate carriers or larger sustainment packs. The FlatPack Piggy Back Straps (sold separately) can be purchased for rapid don/doff capabilities when directly integrating the FlatPack with a plate carrier.

Although designed with the Special Operations end user in mind, the FlatPack Plus makes an excellent everyday pack for civilians (capable of carrying laptops or tablets up to 14”).

Note: Disruptive Grey colorway features 3D Mesh Padded Back Panel (no MOLLE/PALS) and does not have a loop field on the front of the pack for a non-tactical look.

Item Comes With

(1) FlatPack Plus
(2) FlatPack Side Straps

Esstac Side by Side 1+2 5.56 GAP Shorty – Webbing

Brian — Tue, 07 Nov 2023 17:23:04 +0000

he 5.56 1+2 GAP side by side kywi is made for STANAG and Double Stack Pistol magazines. Due to the GAP's in the pouch, it is intended to be used on belts and will not line up with MOLLE/PALS webbing. It is recommended to be used with belt loops, as WTF straps are not designed to be used with non standard "mini" pals webbing found on belts. Can be used for right handed or left handed shooters. All you have to do is take the kywi's out and turn pouch around and reinsert the kywi's. This pouch is made for AR-15 style magazines.

Crye Precision G4 Field Shirt

Brian — Fri, 21 Apr 2023 17:11:18 +0000

Milspec Plastics Cobra Cuff KYWI Pouch

Brian — Mon, 12 Sep 2022 19:57:01 +0000

Esstac pouches for the Milspec Plastic Cobra Cuffs®

Edgar Sherman Design SAP Bucket Dump Pouch

Brian — Fri, 09 Sep 2022 03:54:35 +0000

The ESD Sap Bucket is their solution to all the problems our team and end users experience with dump pouches. The ESD Sap Bucket is a dump pouch that aids in gear retention, increases consistency when inserting equipment, drains sand, water, and snow rapidly, and can stow away in a compact package. Images accurately represent mesh sizing per color. https://youtu.be/YX0_-eHYLNk?si=NbrRX9eBPhh4cnNq

Edgar Sherman Design Sling

Brian — Tue, 26 Jul 2022 14:52:21 +0000

The Edgar Sherman Design Sling, ESD Sling, was designed with purpose, research extreme testing, and experience. The ESD Sling is adaptable to the end-user. The ESD Sling is highly customizable to any rifle, sub gun, shotgun, hunting rifle, bolt action, and PDW weapon system. There are two adjustment sections on the ESD sling. A rear adjustment section to fit the ESD sling to your body size and additional gear. And a quick-adjust section to loosen or tighten the sling while in use. The ESD Sling adjustment system is more adaptable to natural body movement and body mechanics. The 1-inch width of the ESD sling has less friction than wider slings and allows the ESD sling to move across your body without resistance.

The ESD sling has an elastic regulator preventing webbing from twisting or jamming when adjusting. This system also allows the sling to be folded upon itself and stored tightly to the weapon system. This feature is great for patrol vehicle storage or bag/pack/case storage. Simply pull on the ESD Sling to deploy the sling to its full length.