OD Green – Get Tactical Supply https://gettacticalsupply.com Mon, 21 Sep 2026 14:22:18 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.2 https://gettacticalsupply.com/wp-content/uploads/2022/12/wp-1670903928945-50x50.jpg OD Green – Get Tactical Supply https://gettacticalsupply.com 32 32 195754262 Wavian Fuel Can Spout https://gettacticalsupply.com/product/wavian-fuel-can-spout/ Mon, 31 Aug 2026 18:00:19 +0000 https://gettacticalsupply.com/?post_type=product&p=18636 Features
  • Works on most diesel and equipment tanks
  • The flow rate is fast
  • No Leaks
  • New child-proof nozzle with red tip plugs; **please remember to remove before use**
Dimensions (L x W x H): 6 x 12 x 3 Weight: 2lbs]]> Features
  • Works on most diesel and equipment tanks
  • The flow rate is fast
  • No Leaks
  • New child-proof nozzle with red tip plugs; **please remember to remove before use**
Dimensions (L x W x H): 6 x 12 x 3 Weight: 2lbs]]> 18636 Wavian Jerry Can – 2.6 Gallon Capacity https://gettacticalsupply.com/product/wavian-jerry-can-2-6-gallon-capacity/ Mon, 31 Aug 2026 17:00:47 +0000 https://gettacticalsupply.com/?post_type=product&p=18630 These leak-proof steel fuel cans come directly from the same manufacturer that has supplied many NATO countries for over 75 years and are the highest quality jerry cans on the market today.  Rigorously tested, they boast a number of features: 0.9 mm steel walls, an interior rust-proof Rezol lining*, an internal breather pipe for splash-proof pouring, a three-handle configuration for easy carrying, a Leak-proof bayonet closure, and a locking pin for the cap. Wavian fuel cans come in Red for gasoline, Blue for kerosene, and Yellow for diesel. The sizes available are 10 Liters (2.6 Gallons) and 20 Liters (5.3 Gallons). All come with a safety spout. Dimensions and Weight 20L: Measures 13.5x18.5x6.5 inches (34.5x47x16.5 cm) Weighs 10.3 lbs (4.7kg) Dimensions and Weight 10L: Measures 13.5x11.5x6.5 inches (34.5x28x16.5 cm) Weighs 7.5 lbs (3.4kg) *The lining of the fuel can can react with water, and these cans are made for fuel only. For water storage, check out our food-grade water cans.    ***The Wavian Fuel Nozzle comes separately*** Its can be purchased HERE]]> Dimensions and Weight 20L:
Measures 13.5×18.5×6.5 inches (34.5x47x16.5 cm)
Weighs 10.3 lbs (4.7kg)

]]> 18630 Wavian Jerry Can – 5.3 Gallon Capacity https://gettacticalsupply.com/product/wavian-jerry-can-5-3-gallon-capacity/ Mon, 31 Aug 2026 17:00:22 +0000 https://gettacticalsupply.com/?post_type=product&p=18604 These leak-proof steel fuel cans come directly from the same manufacturer that has supplied many NATO countries for over 75 years and are the highest quality jerry cans on the market today.  Rigorously tested, they boast a number of features: 0.9 mm steel walls, an interior rust-proof Rezol lining*, an internal breather pipe for splash-proof pouring, a three-handle configuration for easy carrying, a Leak-proof bayonet closure, and a locking pin for the cap. Wavian fuel cans come in Red for gasoline, Blue for kerosene, and Yellow for diesel. The sizes available are 10 Liters (2.6 Gallons) and 20 Liters (5.3 Gallons). All come with a safety spout. Dimensions and Weight 20L: Measures 13.5x18.5x6.5 inches (34.5x47x16.5 cm) Weighs 10.3 lbs (4.7kg) Dimensions and Weight 10L: Measures 13.5x11.5x6.5 inches (34.5x28x16.5 cm) Weighs 7.5 lbs (3.4kg) *The lining of the fuel can can react with water, and these cans are made for fuel only. For water storage, check out our food-grade water cans.    ***The Wavian Fuel Nozzle comes separately*** Its can be purchased HERE]]> Dimensions and Weight 20L:
Measures 13.5×18.5×6.5 inches (34.5x47x16.5 cm)
Weighs 10.3 lbs (4.7kg)

]]> 18604 SLR Rifleworks Glock 19 Mag Extension With Spring https://gettacticalsupply.com/product/slr-rifleworks-glock-19-mag-extension/ Thu, 15 May 2025 14:00:29 +0000 https://gettacticalsupply.com/?post_type=product&p=16032 It comes with the larger spring needed and mag extension.
  • G19 Mag Extension for Glock 19 Mags Gen 3,4,5
  • Cerakote OD Green H-236
  • + 5 Capacity
  • ETS Mag Compatible
  • 6061 T6 Aluminum
  • Black Anodized NOTE- DOES NOT FIT 19X, 19X uses G17 Extensions
  • G19 Extended Mag Spring for Glock 19
  • 11.5 Coil +10%
  • To be used with our Glock 19 Mag Extensions
  • Not for 10-round mag bodies
For Custom Colors, please call or email    ]]> DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither SLR Rifleworks, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com
]]> 16032 SLR Rifleworks Glock 17 Mag Extension With Spring https://gettacticalsupply.com/product/slr-rifleworks-glock-17-mag-extension/ Thu, 15 May 2025 13:56:31 +0000 https://gettacticalsupply.com/?post_type=product&p=16014 It comes with the larger spring needed and mag extension.
  • G17 Mag Extension for Glock 17
  • Now with DOT matrix
  • +5 Capacity
  • ETS Mag Compatible
  • 6061 T6 Aluminum
  • Black Anodized
  • G17 Extended Mag Spring
  • NEW Spec improved spring 12 Coil +10% (3/20/25)
  • To be used with our G17 and Magpul 17 Mag Extensions
  • Not for 10-round mag bodies
For Custom Colors, Please call or email    ]]> DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither SLR Rifleworks, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com
]]> 16014 Princeton Tec Switch RGB MPLS https://gettacticalsupply.com/product/princeton-tec-switch-rgb-mpls/ Wed, 14 May 2025 14:35:53 +0000 https://gettacticalsupply.com/?post_type=product&p=15968
Power – 10 lumens
Lamp Mode – Flood
Run Time – 16 hours
Batteries – (2) CR2016 Lithium Coin Cells
Battery Type – Coin Cell
Color of Light
   White Light
   Red Light
   Blue Light
   Green Light
   Infrared Light
Helmet Mount – Helmet Rail
Series – MPLS
Weight – 17g
Water Resistant – IPX4
Warranty – 1 year
]]> 15968 Stroup Knives – GP Series https://gettacticalsupply.com/product/stroup-knives-gp-series/ Mon, 07 Apr 2025 17:00:47 +0000 https://gettacticalsupply.com/?post_type=product&p=15511 15511 Rite In The Rain Mechanical Clicker Pencil https://gettacticalsupply.com/product/15417/ Mon, 31 Mar 2025 16:14:06 +0000 https://gettacticalsupply.com/?post_type=product&p=15417 Rite in the Rain Mechanical Clicker Pencils are built to be tough, dependable, and refillable. They’re made to survive.
    • GLOVE FRIENDLY - The knurled-metal grip and one-hand click lead advancement offer glove-friendly handling.
    • WORK-READY LEAD - Fine enough to record details but thick enough to survive the work site, the dark (2B) 1.3mm lead is ready to get the job done.
    • EASY TO RELOAD - Simply drop a single lead into the shaft under the threaded eraser cap. Refills for the thick leads and clean erasers are available.
]]> Rite in the Rain Mechanical Clicker Pencils are built to be tough, dependable, and refillable. They’re made to survive.
    • GLOVE FRIENDLY - The knurled-metal grip and one-hand click lead advancement offer glove-friendly handling.
    • WORK-READY LEAD - Fine enough to record details but thick enough to survive the work site, the dark (2B) 1.3mm lead is ready to get the job done.
    • EASY TO RELOAD - Simply drop a single lead into the shaft under the threaded eraser cap. Refills for the thick leads and clean erasers are available.
]]> 15417 Rite In The Rain Mini Bolt Action Pen https://gettacticalsupply.com/product/rite-in-the-rain-mini-bolt-action-pen/ https://gettacticalsupply.com/product/rite-in-the-rain-mini-bolt-action-pen/#respond Fri, 28 Mar 2025 11:44:29 +0000 https://gettacticalsupply.com/?post_type=product&p=15375 https://gettacticalsupply.com/product/rite-in-the-rain-mini-bolt-action-pen/feed/ 0 15375 True North Concepts Modular Holster Adaptor https://gettacticalsupply.com/product/true-north-concepts-mha-universal-mount/ Tue, 02 May 2023 17:08:00 +0000 https://gettacticalsupply.com/?post_type=product&p=10268 tactical professionals, law enforcement, and competition shooters, the MHA eliminates the unwanted movement, flex, and sliding common in factory polymer mounts. Machined from 0.190” thick domestically sourced 6061-T6 aluminum, the adaptor uses a unique clamping system that sandwiches the belt between an aluminum adapter and belt bars. This creates a rigid, flex-free platform that keeps your holster exactly where it belongs—no matter your activity. The MHA supports the popular “Mid-Ride” carry position, which lowers your holster below the belt line for improved clearance around body armor, pouches, or gear. It fits all three-hole Safariland™-pattern holsters and other brands that use this proven hole pattern, including QLS, MLS, and ELS quick-detach systems. Users can customize both ride height and cant angle, with three vertical mounting positions spaced ½” apart and up to 20° of total cant adjustment (10° forward and 10° rearward). This creates a personalized setup that’s tailored to your body type, duty belt, or tactical belt configuration. For additional stabilization, the Leg Strap Kit (sold separately), ensures that your holster mount stays secure during high mobility, prone shooting, or off-road movement. The MHA’s precision engineering and low-profile aluminum design make it the foundation of a reliable holster system—trusted by professionals who demand more from their equipment. LEG STRAP KITS (LSK) SOLD SEPARATELY ]]> tactical professionals, law enforcement, and competition shooters, the MHA eliminates the unwanted movement, flex, and sliding common in factory polymer mounts. Machined from 0.190” thick domestically sourced 6061-T6 aluminum, the adaptor uses a unique clamping system that sandwiches the belt between an aluminum adapter and belt bars. This creates a rigid, flex-free platform that keeps your holster exactly where it belongs—no matter your activity. The MHA supports the popular “Mid-Ride” carry position, which lowers your holster below the belt line for improved clearance around body armor, pouches, or gear. It fits all three-hole Safariland™-pattern holsters and other brands that use this proven hole pattern, including QLS, MLS, and ELS quick-detach systems. Users can customize both ride height and cant angle, with three vertical mounting positions spaced ½” apart and up to 20° of total cant adjustment (10° forward and 10° rearward). This creates a personalized setup that’s tailored to your body type, duty belt, or tactical belt configuration. For additional stabilization, the Leg Strap Kit (sold separately), ensures that your holster mount stays secure during high mobility, prone shooting, or off-road movement. The MHA’s precision engineering and low-profile aluminum design make it the foundation of a reliable holster system—trusted by professionals who demand more from their equipment. LEG STRAP KITS (LSK) SOLD SEPARATELY ]]> 10268