Wolf Grey – Get Tactical Supply

Ferro Concepts PVS-31 Battery Retention System

Brian — Wed, 14 May 2025 13:43:10 +0000

https://youtu.be/p1OImB2d4hk?si=OLFItesqvtr8S43T The Ferro Concepts PVS-31 Battery Retention System provides a way to securely secure a PVS-31 battery pack to a helmet safely. The mounting system is secured utilizing features already found on most helmets. The battery pack is held in a sleeve that is affixed to the helmet with Velcro and can be retained by three anchors. Two lateral anchors attach to the helmet with chin strap bolts or by being looped through accessory rails. The optional third anchor is a firm bridge to an IR Strobe mount that can be adjusted and affixed to the top of the helmet with Velcro. Tie-points at the front of the mount can be used to attach a strobe lanyard and secure the system at the front of the helmet as well.

Compatible with a variety of ballistic/bump helmets
Dual anchor points for battery pack retention
Additional tie-points for cable management
Adjustable bridge with strobe mount
Fits PVS-31 and GPNVG Battery Packs
Made in the U.S.A.

Spiritus Systems SACK Pouch Mk3

Brian — Thu, 24 Apr 2025 14:59:48 +0000

The Spiritus Systems Sub Abdominal Carrying Kit or "SACK" is the most versatile tactical "fanny pack" on the market. It was designed to make critical equipment easy to access from both sides or when in a confined space like a vehicle. The pouch features a half zip design, which means that your equipment will not easily fall out of the pouch even if the zipper is left unsecured. The front of the pouch features a small zippered stash pocket that is perfect for easy access to small items. The bottom of the pouch features two elastic loops that can be adjusted to hold a Tourniquet or other equipment that you may need to rapidly deploy. If bottom carry doesn't fit your mission needs, you can easily remove and reinstall the loops as necessary. The inside features soft loop on both sides. This makes the pouch very dynamic, giving you the ability to use our Pouch Insert Suite to fit your requirements. It also features two slide-locks that make it easy to adjust the tension of the elastic loops hanging below, as well as two tie-down loops for securing sensitive equipment. The two grommet holes on the bottom aid with drainage of the pouch if submersion occurs. The Spiritus Systems SACK is designed to fit onto the bottom of our Micro Fight Chest Rig, LV-119 Plate Carrier, or any other rig that accommodates standard hook and loop, making it a versatile choice for those changing loadouts often. Simply pull this off one kit and add it to another. Hook & loop Attachment measures 7"x 4"

Spiritus Systems Small General Purpose Pouch

Brian — Wed, 16 Apr 2025 14:19:08 +0000

The Spiritus Systems Small GP Pouch features a front pocket for storing items like VS-17 panels or SSE bags. The pouch is built with extra depth to store Night Vision Goggles and has been successfully test-fitted with 15s, 31s, and DTNVGS. The pouch is constructed out of high-quality 500D Cordura nylon. The inside of the pouch is lined with a loop and accepts our Pouch Insert Suite. The Spiritus Systems Small GP Pouch is designed to mount to MOLLE or Belt Systems. For MOLLE, the pouch consumes 3 Columns. For Belts, it has a pass-through that can accommodate 2" wide belts. Dimensions (Approximate) Height 5.5" x Width 5.5" x Depth 3"

Spiritus Systems SPUD Pouch

Brian — Wed, 16 Apr 2025 13:53:34 +0000

The Spiritus Systems SPUD pouch is built to hold pretty much anything. Spiritus Systems has taken the traditional, open-top, general-purpose pouch and thoroughly re-worked it to give it a big bump in versatility. The Spiritus Systems SPUD pouch can carry one, two, and even three 5.56 magazines, up to two 7.62 magazines, AK-47 magazines, 6.8 mags, smoke grenades, small radios, 16-oz Water Bottles, and more! - The rim of the pouch is lined with an adjustable shock cord loop to keep the contents secure and slip-free even if they are significantly smaller than the pouch itself. - The top of the pouch features both hook & loop and pull tabs so you can choose between the included scrim cover or an adjustable shock cord flap. - Both options are included with every SPUD pouch. The scrim cover, when pulled tight will wrap around any irregular shapes and keep the user’s kit fully locked into the pouch while still maintaining full coverage. - The whole system takes up two columns of MOLLE and can be mounted pretty much anywhere.

Edgar Sherman Design Padded Sling

Brian — Tue, 08 Apr 2025 20:44:52 +0000

Edgar Sherman Design Padded Rifle Sling maintains key features of the standard ESD Rifle Sling, like the pull tab and super smooth quick-adjust system, while adding a 0.25” thick pad for extra comfort.

Agilite Amap III Assault Pack

Brian — Tue, 25 Feb 2025 16:12:37 +0000

• 500D CORDURA® Brand Mil Spec Nylon
• Mil Spec polymer buckles and hardware
• YKK Zippers
• Velcro® Brand mounting platform
• Min Volume 4 liters, max volume 18 Liters + additional 8 Liter Beavertail compartment
• Laser-cut Velcro MOLLE overlay panels
• Hook and loop rear panel dimensions: 25cm * 9cm (9.8″ x 3.5″)
• Triple Density Fusion Foam shoulder and rear comfort padding
• Weight: 2.13lbs (0.96kg)

Dimensions
– Height: 15.7″ (40cm)
– Width: 11″ (28cm)
– Depth: 7.8″ (20cm)

Details
• Most Versatile and Universal Assault Pack on the market
• Crossover EDC pack for additional daily use
• Designed, Tested & Battle-Proven in Israel
• Can be used with shoulder straps or directly attaches to Plate Carriers
• Compatible with Swift Clip placard and chest rigs to add additional carrying capacity.
• Advanced new proprietary beavertail design for carrying helmets, clothing, and other gear.
• Goes from flat and low profile (4 Liters) to fully expanded (14 liters) capacity in seconds, with an additional 8 Liters of beavertail space as well as other external carrying capabilities.
• Beavertail becomes an additional admin pocket
• Detachable shoulder straps
• Directly attaches to Non-Agilite plate carriers using the AMAP III Conversion Kit (sold Separately)
• Side and underside additional carrying capability for safely attaching clothing, sleeping bags, sniper mats etc.
• Low profile design for use in CQB, Rotary, or vehicle-based ops
• Zipper admin pouch for smaller items.
• Triple Layer Fusion Foam padding and rear airflow channel for extreme comfort
• Designated hydration compartment
• Optional EDC insert set for laptops and other EDC items.
• Full clamshell opening and full Velcro® interior to attach hook pouches
• Built-in ports for Hydration and Comms tubes and cables
• Left and right exit ports for radio antennas and longer items
• Agilite K-Series™ Compatible

Blue Force Gear Ten-Speed SF Chest Rig

Brian — Wed, 14 Feb 2024 15:28:04 +0000

The Blue Force Gear Ten-Speed SF Chest Rig features a split-front design, making it easy to unzip when lying prone. This low-profile tactical chest rig removes unnecessary bulk with a minimalistic, lightweight design. The Ten-Speed military-grade elastic pouches are designed to lay flat when not in use and will secure four M4 / AR / SR25 / AK / SCAR-H magazines and other similarly sized items. MOLLEminus™ fields on the front of the magazine pouches allow additional MOLLE accessories to be mounted to the front of each mag pouch.

Blue Force Gear Low Profile General Purpose Pouch

Brian — Fri, 02 Feb 2024 15:59:50 +0000

The Blue Force Gear Low Pro GP Pouch was designed to fit the Ten-Speed SF Chest Rig and the Dapper Satchel. This general-purpose pouch features a slight outward taper from top to bottom, making it easier to access its contents when mounted on the chest. The has two ambidextrous zippered pockets, and the larger pocket contains Ten-Speed elastic to help organize the pouch's contents. When empty, the pouches have a low, flat profile.

Blue Force Gear Two-4 Waist Pack for Plate Carriers

Brian — Thu, 30 Nov 2023 16:42:22 +0000

The Blue Force Gear Two-4 Waist Pack was designed as a general support pouch to function in tandem with the operator’s plate carrier or as a standalone waist-mounted pouch, providing supplemental storage space for mission-critical gear. With an extremely adaptable layout, you’ll find easy access to any comms, admin, ammo, and IFAK / medical items, not easily stored within your plate carrier or combat belt.

Esstac Side by Side 1+2 5.56 GAP Shorty – Webbing

Brian — Tue, 07 Nov 2023 17:23:04 +0000

he 5.56 1+2 GAP side by side kywi is made for STANAG and Double Stack Pistol magazines. Due to the GAP's in the pouch, it is intended to be used on belts and will not line up with MOLLE/PALS webbing. It is recommended to be used with belt loops, as WTF straps are not designed to be used with non standard "mini" pals webbing found on belts. Can be used for right handed or left handed shooters. All you have to do is take the kywi's out and turn pouch around and reinsert the kywi's. This pouch is made for AR-15 style magazines.