FDE – Get Tactical Supply https://gettacticalsupply.com Wed, 07 Jan 2026 16:18:30 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://gettacticalsupply.com/wp-content/uploads/2022/12/wp-1670903928945-50x50.jpg FDE – Get Tactical Supply https://gettacticalsupply.com 32 32 195754262 Safariland Single Strap Leg Shroud with QLS 22 https://gettacticalsupply.com/product/safariland-single-strap-leg-shroud/ https://gettacticalsupply.com/product/safariland-single-strap-leg-shroud/#respond Fri, 10 Sep 2021 03:51:02 +0000 https://gettacticalsupply.com/?post_type=product&p=3218

6004-27 - SINGLE STRAP LEG SHROUD WITH DROP FLEX ADAPTER (DFA) & QLS 22

The Safariland Single Strap Leg Shroud with Drop Flex Adapter (DFA) and receiver plate combination is an add-on part for Safariland® holsters. It allows quick transfer of holster and accessories from thigh carry to other mounting locations. It includes a Quick Locking System QLS 22 Receiver Plate which is to be used with a holster that already has a QLS 19 Locking Fork attached. The DFA replaces the standard vertical leg strap and raises the height of the system on the thigh for increased stability. The single strap high plate provides for a low-profile carry. The DFA accepts belt widths between 2” - 2.25" (50mm - 58mm). The leg shroud features a silicone strap for non-slip traction.

FEATURES

  • Single Strap Leg Shroud with Drop Flex Adapter (DFA) and receiver plate combination
  • Allows quick transfer of holster and accessories from thigh carry to other mounting locations
  • Includes a Quick Locking System QLS 22 Receiver Plate
  • DFA replaces the standard vertical leg strap and raises the height of the system on the thigh for increased stability
]]>

6004-27 - SINGLE STRAP LEG SHROUD WITH DROP FLEX ADAPTER (DFA) & QLS 22

The Safariland Single Strap Leg Shroud with Drop Flex Adapter (DFA) and receiver plate combination is an add-on part for Safariland® holsters. It allows quick transfer of holster and accessories from thigh carry to other mounting locations. It includes a Quick Locking System QLS 22 Receiver Plate which is to be used with a holster that already has a QLS 19 Locking Fork attached. The DFA replaces the standard vertical leg strap and raises the height of the system on the thigh for increased stability. The single strap high plate provides for a low-profile carry. The DFA accepts belt widths between 2” - 2.25" (50mm - 58mm). The leg shroud features a silicone strap for non-slip traction.

FEATURES

  • Single Strap Leg Shroud with Drop Flex Adapter (DFA) and receiver plate combination
  • Allows quick transfer of holster and accessories from thigh carry to other mounting locations
  • Includes a Quick Locking System QLS 22 Receiver Plate
  • DFA replaces the standard vertical leg strap and raises the height of the system on the thigh for increased stability
]]> https://gettacticalsupply.com/product/safariland-single-strap-leg-shroud/feed/ 0 3218 Unity Tactical TAPS-SYNC – Surefire / Crane Laser Lead https://gettacticalsupply.com/product/unity-tactical-taps-sync-surefire-crane-laser-lead/ https://gettacticalsupply.com/product/unity-tactical-taps-sync-surefire-crane-laser-lead/#respond Mon, 02 Aug 2021 03:02:47 +0000 https://gettacticalsupply.com/product/unity-tactical-taps-sync-surefire-crane-laser-lead/ TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one-point command and control system for all weapon-mounted electronics. It provides low-profile, dual-device control for lights and lasers. TAPS mounts directly to any industry-standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third-party rail adapters are needed, keeping the weapon lighter and sleeker. It features two onboard buttons and two accessory leads.  Available in 4 button configurations, TAPS SYNC utilizes a patented double pole dome switch to fire both devices simultaneously on isolated circuits to protect your devices. Meets MIL-STD-801G(1)-512.6 ]]> TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one-point command and control system for all weapon-mounted electronics. It provides low-profile, dual-device control for lights and lasers. TAPS mounts directly to any industry-standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third-party rail adapters are needed, keeping the weapon lighter and sleeker. It features two onboard buttons and two accessory leads.  Available in 4 button configurations, TAPS SYNC utilizes a patented double pole dome switch to fire both devices simultaneously on isolated circuits to protect your devices. Meets MIL-STD-801G(1)-512.6 ]]> https://gettacticalsupply.com/product/unity-tactical-taps-sync-surefire-crane-laser-lead/feed/ 0 1786 Unity Tactical TAPS DBAL https://gettacticalsupply.com/product/unity-tactical-taps-dbal/ https://gettacticalsupply.com/product/unity-tactical-taps-dbal/#respond Mon, 02 Aug 2021 03:02:47 +0000 https://gettacticalsupply.com/product/unity-tactical-taps-dbal/ TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one-point command and control system for weapon-mounted electronics. It provides low-profile, dual-device control for Surefire/Modlite weapon lights and Steiner DBAL lasers. TAPS-DBAL mounts directly to any industry-standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third-party rail adapters are needed, keeping the weapon lighter and sleeker. It features two onboard buttons and three accessory leads. TAPS-DBAL is designed specifically for use with Steiner DBAL-A3 and A4 models alongside Surefire and Modlite weapon lights. TAPS-DBAL allows for full functional use of the unique “Visible Override” feature on Steiner DBAL-A3 and A4 lasers. The Y-Splitter Crane Laser leads plug into the standard and Visible Override ports on the back of the laser. The Light lead plugs into the Surefire or Modlite tail cap port. Button 1 will fire the DBAL laser in whatever setting is manually selected on the laser housing. Button 2 will fire the white light + DBAL laser visible laser, regardless if it is physically set to an infrared setting. TAPS-DBAL is the only switch that provides full functional utility of the DBAL-A3/A4 Visible Override feature. This capability gives users unmatched control of their light/laser combo in all tactical situations. Weight: 2.25oz w/hardware Waterproof: 1 meter for 30 minutes Meets MIL-STD-801G(1)-512.6]]> TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one-point command and control system for weapon-mounted electronics. It provides low-profile, dual-device control for Surefire/Modlite weapon lights and Steiner DBAL lasers. TAPS-DBAL mounts directly to any industry-standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third-party rail adapters are needed, keeping the weapon lighter and sleeker. It features two onboard buttons and three accessory leads. TAPS-DBAL is designed specifically for use with Steiner DBAL-A3 and A4 models alongside Surefire and Modlite weapon lights. TAPS-DBAL allows for full functional use of the unique “Visible Override” feature on Steiner DBAL-A3 and A4 lasers. The Y-Splitter Crane Laser leads plug into the standard and Visible Override ports on the back of the laser. The Light lead plugs into the Surefire or Modlite tail cap port. Button 1 will fire the DBAL laser in whatever setting is manually selected on the laser housing. Button 2 will fire the white light + DBAL laser visible laser, regardless if it is physically set to an infrared setting. TAPS-DBAL is the only switch that provides full functional utility of the DBAL-A3/A4 Visible Override feature. This capability gives users unmatched control of their light/laser combo in all tactical situations. Weight: 2.25oz w/hardware Waterproof: 1 meter for 30 minutes Meets MIL-STD-801G(1)-512.6]]> https://gettacticalsupply.com/product/unity-tactical-taps-dbal/feed/ 0 1795 Unity Tactical TAPS (Standard) https://gettacticalsupply.com/product/unity-tactical-taps-standard/ https://gettacticalsupply.com/product/unity-tactical-taps-standard/#respond Mon, 02 Aug 2021 03:02:42 +0000 https://gettacticalsupply.com/product/unity-tactical-taps-standard/ https://gettacticalsupply.com/product/unity-tactical-taps-standard/feed/ 0 1779 Unity Tactical Hot Button – Picatinny Rail Mount https://gettacticalsupply.com/product/unity-tactical-hot-button-picatinny-rail-mount/ https://gettacticalsupply.com/product/unity-tactical-hot-button-picatinny-rail-mount/#respond Mon, 02 Aug 2021 03:02:38 +0000 https://gettacticalsupply.com/product/unity-tactical-hot-button-picatinny-rail-mount/ Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail estate, improve actuation ergonomics, and mechanically integrate with weapon fore-ends, Hot Button has successfully reinvented how you interface with your lights and lasers. The first major innovation is the button angle. Legacy remote tape switches feature a flat pad that forces users to strain their thumbs at an unnatural angle to apply consistent pressure to activate a momentary function. Hot Button presents the activation button at a 45-degree angle for an exponentially more comfortable press. This is especially important when activating the button under pressure. A raised, crenelated bezel protects the button from accidental actuation, while providing a tactile index point for the user’s thumb. Because Hot Button is angled, the overall footprint is much smaller than factory OEM pressure pads. Not only does this clean up rails on traditional weapons, but it greatly increases the accessory layout options on smaller SMG and PDW’s. If that weren’t enough, we have designed two separate versions of Hot Button that will attach directly to either Mil-Std M1913 Picatinny or M-LOK rail interface. Both rail systems are approved and standardized by the US Department of Defense for use on issued weapons. Hot Button secures to these rails with hardware, eliminating the need for Velcro, 100mph Tape, or Zip Ties. This secure attachment method ensures your switches stay on the gun (in the location you placed them) regardless of battlefield abuse. Hot Button is available for standard Surefire tail caps and standard Crane-Style laser ports (found in B.E. Meyers, Holosun, Insight/L-3, Steiner, and Wilcox products). Meets MIL-STD-801G(1)-512.6 * “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies and may vary from the photos shown online. ]]> Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail estate, improve actuation ergonomics, and mechanically integrate with weapon fore-ends, Hot Button has successfully reinvented how you interface with your lights and lasers. The first major innovation is the button angle. Legacy remote tape switches feature a flat pad that forces users to strain their thumbs at an unnatural angle to apply consistent pressure to activate a momentary function. Hot Button presents the activation button at a 45-degree angle for an exponentially more comfortable press. This is especially important when activating the button under pressure. A raised, crenelated bezel protects the button from accidental actuation, while providing a tactile index point for the user’s thumb. Because Hot Button is angled, the overall footprint is much smaller than factory OEM pressure pads. Not only does this clean up rails on traditional weapons, but it greatly increases the accessory layout options on smaller SMG and PDW’s. If that weren’t enough, we have designed two separate versions of Hot Button that will attach directly to either Mil-Std M1913 Picatinny or M-LOK rail interface. Both rail systems are approved and standardized by the US Department of Defense for use on issued weapons. Hot Button secures to these rails with hardware, eliminating the need for Velcro, 100mph Tape, or Zip Ties. This secure attachment method ensures your switches stay on the gun (in the location you placed them) regardless of battlefield abuse. Hot Button is available for standard Surefire tail caps and standard Crane-Style laser ports (found in B.E. Meyers, Holosun, Insight/L-3, Steiner, and Wilcox products). Meets MIL-STD-801G(1)-512.6 * “FDE” is used throughout our catalog to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from UNITY and other companies and may vary from the photos shown online. ]]> https://gettacticalsupply.com/product/unity-tactical-hot-button-picatinny-rail-mount/feed/ 0 1730 Unity Tactical Micro Hub 2.0 https://gettacticalsupply.com/product/unity-tactical-micro-hub/ https://gettacticalsupply.com/product/unity-tactical-micro-hub/#respond Mon, 02 Aug 2021 03:02:38 +0000 https://gettacticalsupply.com/product/unity-tactical-micro-hub/ NOTE: FUSION Micro Hub 2.0 will allow direct top mount with Steiner® DBAL-A2, DBAL-A3, DBAL-I2.  It will NOT interface with DBAL-D2 and DBAL-A4. Micro Hub 2.0 Updates: – Recoil Lug – Improved integration with the BE Meyers MAWL – Direct mounting of Steiner Lasers on the top surface – Improved integration w/LightWing & PEQ-15/a Lasers https://youtu.be/biDS4_IQks8]]> TOP INTERFACE: Surefire Scout Light / Streamlight ProTac Rail Mount Light / Folding Backup Iron Sight / Fixed Backup Iron Sight

SIDE INTERFACE: Surefire Scout Light / Surefire Raid Light / Streamlight ProTac Rail Mount Light / LightWing

FUSION™ is a modular, multi-purpose mount designed to give the end-user extreme flexibility in mounting options. It was engineered from the ground up to provide a strong mounting base with the widest range of configurations while remaining lightweight and low profile.

]]> https://gettacticalsupply.com/product/unity-tactical-micro-hub/feed/ 0 1735 Unity Tactical FUSION Light Wing Adapter https://gettacticalsupply.com/product/unity-tactical-lightwing-adapter/ https://gettacticalsupply.com/product/unity-tactical-lightwing-adapter/#respond Mon, 02 Aug 2021 03:02:38 +0000 https://gettacticalsupply.com/product/unity-tactical-lightwing-adapter/ FUSION Micro Hub, the FUSION LightWing Adapter allows the user to mount both a backup iron sight and light in conjunction with the ATPIAL or ATPIAL-C Multi-Function Aiming Laser. The FUSION LightWing adapter is designed to extend the light out under the side of the ATPIAL while still mounting on the top rail. It is lightweight, low profile, and compatible with a wide range of FUSION accessories. Mounting the unit behind the ATPIAL still allows access to the battery compartment without removing either unit. Note: This part comes in both Left and Right side versions, however, either side can be used ambidextrously depending on where the Micro Hub is placed. A Left Hand LightWing Adapter will put the light on the left side of the ATPIAL if the Micro Hub is mounted behind the ATPIAL. If the Micro Hub is mounted in front of the ATPIAL, a Left Hand ATPIAL Adapter can be reversed and used on the right side of the weapon.]]> FUSION Micro Hub, the FUSION LightWing Adapter allows the user to mount both a backup iron sight and light in conjunction with the ATPIAL or ATPIAL-C Multi-Function Aiming Laser. The FUSION LightWing adapter is designed to extend the light out under the side of the ATPIAL while still mounting on the top rail. It is lightweight, low profile, and compatible with a wide range of FUSION accessories. Mounting the unit behind the ATPIAL still allows access to the battery compartment without removing either unit. Note: This part comes in both Left and Right side versions, however, either side can be used ambidextrously depending on where the Micro Hub is placed. A Left Hand LightWing Adapter will put the light on the left side of the ATPIAL if the Micro Hub is mounted behind the ATPIAL. If the Micro Hub is mounted in front of the ATPIAL, a Left Hand ATPIAL Adapter can be reversed and used on the right side of the weapon.]]> https://gettacticalsupply.com/product/unity-tactical-lightwing-adapter/feed/ 0 1738 Unity Tactical SARA Sordin Adapter Kit https://gettacticalsupply.com/product/unity-tactical-sara-sordin-adapter-kit/ https://gettacticalsupply.com/product/unity-tactical-sara-sordin-adapter-kit/#respond Mon, 02 Aug 2021 03:02:38 +0000 https://gettacticalsupply.com/product/unity-tactical-sara-sordin-adapter-kit/

SARA Kit Includes:

 

(4) Unity SARA adapters(4) Mounting Set Screws(2) ESS Mounting StudsInstallation Instructions

]]> https://gettacticalsupply.com/product/unity-tactical-sara-sordin-adapter-kit/feed/ 0 1748 Unity Tactical MARK 2.0 Modular Attach Rail Kit https://gettacticalsupply.com/product/unity-tactical-mark-2-0-modular-attach-rail-kit/ https://gettacticalsupply.com/product/unity-tactical-mark-2-0-modular-attach-rail-kit/#respond Mon, 02 Aug 2021 03:02:38 +0000 https://gettacticalsupply.com/product/unity-tactical-mark-2-0-modular-attach-rail-kit/ MARK 2.0 Kit Includes:

  • (1 Pair) Unity MARK 2.0 Adapter Assembly
  • (1 Pair) ARC™ Style Backer Plates + Hardware
  • (2 Pair) EXFIL™ Hardware

Ear Pro Compatibility:

  • Most 3M Peltor™ COMTAC/SWAT-TAC/Sport-TAC/Tactical6 Headsets
  • Most MSA/Sordin Supreme Pro™ Headsets (w/ SARA Adapters -sold separately)
  • Most TCI Liberator™ Headsets (w/ SARA Adapters -sold separately)
  • Most TEA Hi-Threat™ Headsets (w/ SARA Adapters -sold separately)

Helmet Rail Compatibility:

  • Ops-Core FAST™ Series Helmets
  • Ops-Core ACH-ARC™ Rails
  • Crye Precision AirFrame™ Rails
  • Galvion Caiman™ Rails
  • Galvion/Revision Viper™ Rails
  • Team Wendy EXFIL™ Rails (Gen2 / Gen3)
]]> https://gettacticalsupply.com/product/unity-tactical-mark-2-0-modular-attach-rail-kit/feed/ 0 1751 Unity Tactical FAST LPVO Scope Mount https://gettacticalsupply.com/product/unity-tactical-fast-lpvo-scope-mount/ https://gettacticalsupply.com/product/unity-tactical-fast-lpvo-scope-mount/#respond Mon, 02 Aug 2021 03:02:34 +0000 https://gettacticalsupply.com/product/unity-tactical-fast-lpvo-scope-mount/ https://gettacticalsupply.com/product/unity-tactical-fast-lpvo-scope-mount/feed/ 0 1712