Back Panels – Get Tactical Supply

Haley Strategic Partners FlatPack 2.0

Brian — Wed, 24 Jul 2024 02:35:09 +0000

The FlatPack Plus provides a slightly larger capacity than the FlatPack. The main zippered compartment features a full peel-open design for rapid access and visual identification of essential equipment. The interior of the main compartment utilizes the VELCRO® Brand loop on the front and rear interior panels to secure the suite of FlatPack Accessories (sold separately) including Small Clear Top Bags, Large Clear Top Bags, Garment Bags, and other hook-fastened accessories (Single Micro-Utility, Double Micro-Utility, Double Mag Wedge, Holster Wedge, etc.). The main zippered compartment also features an interior zippered hydration/armor compartment designed for carriage of the FlatPack Plus Level IIIA Armor Inserts (Hard Armor and Soft Armor sold separately) as well as 1-litre hydration bladders utilizing the comms/hydration ports. The front of the FlatPack Plus includes a VELCRO® Brand loop field for signal/ID/patches attachment.

A second full-depth zippered compartment is in front of the main zippered compartment providing additional storage and was also dimensioned for carriage of the FlatPack Plus Level IIIA Armor Inserts (Hard Armor and Soft Armor sold separately). A third, admin zippered compartment, is located at the bottom of the pack to store smaller items. The FlatPack Plus includes a chest strap to add stability and comfort while under load as well as comms/hydration loops on the shoulder straps, and grommets at the bottom of the main compartment for drainage when operating in wet/humid conditions. If operating under heavier loadouts, the FlatPack Back Pad and FlatPack Shoulder Pads can be added for additional comfort (sold separately).

The FlatPack and FlatPack Plus were disruptively engineered to directly integrate with all Haley Strategic Chest Rigs and Placards (Micro Chest Rig, X Chest Rig, Heavy Chest Rig, TRMP Chest Rig, and MOLLE Placard Chest Rig) by removing the shoulder straps and replacing the chest rig harness with the provided FlatPack Side Straps. The back of the FlatPack features MOLLE/PALS webbing for secure attachment to plate carriers or larger sustainment packs. The FlatPack Piggy Back Straps (sold separately) can be purchased for rapid don/doff capabilities when directly integrating the FlatPack with a plate carrier.

Although designed with the Special Operations end user in mind, the FlatPack Plus makes an excellent everyday pack for civilians (capable of carrying laptops or tablets up to 14”).

Note: Disruptive Grey colorway features 3D Mesh Padded Back Panel (no MOLLE/PALS) and does not have a loop field on the front of the pack for a non-tactical look.

Item Comes With

(1) FlatPack Plus
(2) FlatPack Side Straps

Crye Precision Zip-On Panel Adapter

Brian — Thu, 30 Nov 2023 17:13:44 +0000

The Crye Precision ZIP-ON PANEL ADAPTER allows quick and easy attachment of the ZIP-ON PANELS to the LVS™ TACTICAL COVER and other compatible plate carriers. The ultra-strong AIRLITE® straps are designed to weave through the vest’s existing MOLLE rows and close via an integrated welded tab. Made in the US from US materials.

JTACtical Solutions J-Hooks

Brian — Sun, 17 Apr 2022 04:12:50 +0000

https://youtu.be/gnpq8Swz4u0 J-Hooks are an ultra-thin, lightweight, and strong alternative to industry-standard QASM / Swift Clip buckles. With a split bar/field repairable design these can be attached to any chest rig or swift clip mag placard in seconds. Made from a thermoplastic composite material that offers a lightweight, yet slim and strong platform that reduces bulk compared to industry-standard plastic buckles making extracting and accessing items from pouches much easier.

Split Bar / Field Repairable design allows installation to any chest rig or micro placard in seconds.
Allows chest rigs and micro placards to still be swapped on and off armor carriers in seconds.
Thermoplastic composite material is very thin, strong, and weighs virtually nothing.
Sold as a pair.
Made in the U.S.A.

Crye Precision Molle Zip-on Panel 2.0

Brian — Thu, 14 Apr 2022 15:51:14 +0000

DESCRIPTION

A quick attach/detach system to set up dedicated load-outs. Zips to rear platebag. Rig up a few different panels for different types of work and switch quickly between them. Features a built-in hydration/breaching tool pocket. Compatible with CAGE ARMOR CHASSIS™, CPC™, AVS™, and JPC™2.0. Vests are sold separately. Made in the US from US materials. FEATURES

Snap closure top opening keeps tools from shifting
Expandable hydration/breaching-tool pocket
Quick zip-on/zip-off attachment

Tactical Tailor Fight Light Malice Clips

Brian — Sat, 15 Jan 2022 07:22:12 +0000

FIGHT LIGHT MALICE CLIPS® are injection molded, heavy-duty, reusable connecting clips that are designed to attach modular pouches to MOLLE/PALS style equipment. FIGHT LIGHT MALICE CLIPS® are not affected by heat or cold, and will never corrode or lose their subdued finish. Once properly closed, the clip will not open until it is disengaged by the user using a flat tipped object such as a knife or screwdriver. Available in Black and Coyote Brown (Long clip only, while supplies last).

Crye Precision Pouch Zip-On Panel 2.0

Brian — Fri, 22 Oct 2021 17:32:02 +0000

DESCRIPTION

A panel of preconfigured pouches that zips to a rear plate bag. Two VELCRO^® brands lined GP pockets across the top, (ideal for use with any of our SPS™ pouch inserts) a wide GP pouch in the middle, and a fold-flat wide GP pouch on the bottom. Use multiple zip-on panels for different types of work and switch quickly between them. Features a built-in hydration/breaching tool pocket and two side access mag pockets. Four hidden flat pockets are located behind GP pouches. Compatible with CAGE ARMOR CHASSIS™, CPC™, AVS™, and JPC™2.0. Vests are sold separately. Made in the US from US materials. FEATURES

Snap closure top opening keeps tools from shifting
2 side-access mag pockets
Expandable hydration/breaching-tool pocket
Dedicated GP pouch configuration - compatible with SPS™ pouch inserts
Ample VELCRO^® brand panels for ID and labeling
Quick zip-on/zip-off attachment

HRT Gear Air-Pass Backer

Brian — Mon, 26 Jul 2021 15:26:13 +0000

Description

Air Pass Backer

The Air Pass Backer is the perfect addition to turn your placard into a chest harness-ready option. The mesh padding offers an added level of comfort and breathability. The Air Pass Backer is constructed using spacer mesh and loop Velcro and is sized to fit our placards. Like all HRT products, the Air Pass Backer is backed by our LIFETIME Warranty.

Mesh backing for breathability
Small 9.25 x 5.5″ (Modulus)
Medium 9.25 x 6″ (Maximus, Response, Triple AR)
Backed by a LIFETIME Warranty

HRT Gear Molle Zip-On Panel

Brian — Mon, 26 Jul 2021 15:26:02 +0000

https://youtu.be/yA0qUWLGpsQ The HRT Molle Zip-On Back panel was designed with the purpose of versatility. With the 11 rows of pals webbing and 4 columns, you can attach your favorite molle gear. This is the ultimate solution for swapping loadouts with one core plate carrier and numerous rear Zip-On panels to suit any mission. Secure attachment with YKK zippers and button loops, our Zip-On panels provide several options for carrying extra gear, ammunition, and equipment for your operational needs. Compatible with the RAC Plate Carrier.

Lifetime warranty.
Size: 8"x12"
11 Rows and 4 Columns
Compatible with all RAC Plate Carriers
Constructed of 500D Cordura nylon
YKK Zippers for durabilityThis product will only work with the RAC plate carrier.

HRT Gear Side-Pull Medical Zip-On Panel

Brian — Mon, 26 Jul 2021 15:25:58 +0000

The HRT Side Pull Medical Pouch Zip-On Half-Back panel was designed with the purpose of versatility. The Side Pull Medical Pouch Zip-On half back panel can be configured with another HRT half back panel to meet your operational needs. This back panel features a sleeve with an insert that can be pulled out from either side of the body. The insert features 2 removable mesh pouches that can hold the contents of an iFAK. Great for buddy or self-aid in high threat situations. This is the ultimate solution for swapping loadouts with one core plate carrier and numerous rear Zip-On panels to suit any mission. Secured attachment with YKK zippers and button loops, our Zip-On panels provide several options for carrying extra gear, ammunition, and equipment for your operational needs. Compatible with the RAC Plate Carrier. Lifetime warranty.

Insert with 2 removable mesh pouches
Adjustable retention
Compatible with all RAC Plate Carriers and Maximus Chest Harness
Constructed of 500D Cordura nylon

HRT Gear Quad Flashbang Zip-On Panel

Brian — Mon, 26 Jul 2021 15:25:58 +0000

The HRT Horizontal Quad Flashbang Pouch Zip-On Half Back panel was designed with the purpose of versatility. The Horizontal Quad Flashbang Pouch Zip-On half back panel can be configured with another HRT half back panel to meet your operational needs. This back panel features four independent pockets secured by a two-stage snap and cord retention, but easily accessible when needed. This two-stage closure allows for maximum security, but quite opening for stealth operations. This is the ultimate solution for swapping loadouts with one core plate carrier and numerous rear Zip-On panels to suit any mission. Secured attachment with YKK zippers and button loops, our Zip-On panels provide several options for carrying extra gear, ammunition, and equipment for your operational needs. Compatible with the RAC Plate Carrier and Maximus Chest Harness. Like all our product this back panel is backed by our lifetime warranty. Four independent Flashbang Pouches Two-Stage closure retention for quiet opening Compatible with all RAC Plate Carriers and Maximus Chest Harness Constructed of 500D Cordura nylon