Rescue Operations – Get Tactical Supply

Petzl Chicane Auxiliary Brake

Brian — Mon, 17 Aug 2026 14:22:50 +0000

The Petzl CHICANE auxiliary braking device allows ZIGZAG and ZIGZAG PLUS mechanical Prusiks to be used on single ropes. It provides continuous additional friction on descents. The excellent compatibility of the CHICANE and mechanical Prusik as an assembled unit ensures smooth rope glide through the brake during ascents. The ergonomic handle provides excellent grip and facilitates movement while limb walking. Thanks to the openable side plate, installation is quick and easy.

Petzl ZigZag Mechanical Prusik

Brian — Mon, 17 Aug 2026 14:21:02 +0000

The Petzl ZIGZAG mechanical Prusik allows the user to move around efficiently in a tree using classic Prusik pulley system technique. The friction chain provides precision and fluidity when moving around. The pulley is mounted on sealed ball bearings to allow the slack to be taken up easily. Can be used on either doubled ropes or a single rope, providing great versatility. The lower attachment hole is fixed to ensure alignment of the device with the axis of the worker and to optimize grip.

Yates Gear Tactical Rappel Belt with Cobra Waist Buckle

Brian — Tue, 23 Jun 2026 20:54:33 +0000

Designed in conjunction with Navy military Special Ops units, this harness is worn as a duty belt. Navy rappel harness criteria mandate NFPA certification for all rappel and extraction harnesses. Stiffener webbing is sewn inside the belt area of the harness to support wearing a sidearm. The leg portion can be quickly donned by opening the pouch and securing the leg loop portions with quick-connect aluminum Cobra buckles. Harness rappel attachment D-ring located at waist level allows for the attachment of a chest harness section (424LW ) to convert this harness into a full-body harness for extraction situations.

An upgrade to the 320USN, this duty belt/harness adds Cobra buckles on each leg and a pouch up front so the legs can be stored out of the way until needed.Certified by UL to NFPA Class II standards and includes a front D Ring for quick attachment of rappel device or metal connectors for extraction. A single rear left gear loop has been stiffened up to better carry equipment.

Compatible with the 424LW chest harness to make a full body harness when necessary.

• Available in Terra w/Black contrasting thread. • Utilizes slot webbing construction. • Certified by UL to meet NFPA Class II requirements

STIHL TS 700 Cutquik

Brian — Mon, 15 Jun 2026 21:33:58 +0000

The 14” STIHL TS 700 cut-off machine is the powerhouse of the STIHL line. Designed for superior handling during the toughest jobs, this machine features a powerful, high-speed engine, large fuel capacity, a five-point dual-element vibration control system built right into the handle, and a semi-automatic belt tensioner with an innovative ribbed belt. Its X2 filtration system is low maintenance and cleans airflow with nearly 100 percent efficiency, reducing downtime for filter maintenance. Each component on this machine was meticulously engineered with demanding professionals in mind. NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately.

Petzl OK Triact-Lock H-Frame Carabiner

Brian — Thu, 12 Feb 2026 20:03:23 +0000

Oval carabiner for use with pulleys and ascenders Lightweight aluminum carabiner with a symmetrical oval shape that allows optimal loading of devices with a wide cross-section, such as pulleys, ascenders and progress-capture pulleys.

CRO Medical DCR 26L Med Bag

Brian — Thu, 12 Feb 2026 01:48:31 +0000

The CRO Medical 26L medical bag meets the 2 Unit LTOWB SOP for internal storage. After surveying the community, most medics with a 2U SOP were opting for some type of 30L ruck to carry blood internally, while still having enough room for resuscitative equipment. By creating space efficiencies with a purpose-built product for medics delivering Damage Control Resuscitation, we were able to reduce the overall footprint compared to commercial off-the-shelf 30L rucks. The DCR-26L is remarkably low profile for the size. A true assault bag and a new industry standard.

Yates Tactical Rappel and Fast Rope Gloves

Brian — Sun, 08 Feb 2026 02:37:48 +0000

The Yates thick full-grain leather second palm extends over the palm and to the second joint of your fingers to provide added protection from the heat and friction generated when fast roping. The index finger is separated for trigger finger dexterity. Also excellent for tactical and rappelling use. Carabiner hole in the wrist for attaching to a harness. Order one size larger if the user intends to wear over a flight glove; gloves fit true to size for dexterity. The entire glove is sewn with heat-resistant KEVLAR thread. • Available in Black and Coyote Tan. • Sizes: S-XXL. Note: Gloves run about 1/2 Size smaller than marked. They do stretch out after some use.

IWA Smoke Deployment Device

Brian — Wed, 23 Apr 2025 19:22:56 +0000

M14 Smoke Deployment Device WHITE – Screening BLACK – Film/Special Effects YELLOW – CBRN/Poisonous Gas Zone GREEN – Safe Zone RED – Danger Zone BLUE – Medical Zone ORANGE – Distress Zone/Maritime PURPLE – Landing Zone Safety Distance: 5 Meters Fuse Burn Time: 2.5 Seconds (+/-0.5 sec) Smoke Emission Time: Average 45-55 sec (not including fuse burn) Sound Level (dB): Negligible Output: Dense smoke coverage Product motion from test point: 1 meter from firing point Fragment Zone: N/A Destruction: N/A Safety Equipment: Please refer to Product MSDS & User Instructions Product Dimensions: Height 121mm x Width 44mm The use of this product is intended for military/police/training/paintball & airsoft use. The use of this product requires eye protection, ear protection, and gloves. Please refer to the terms and conditions for the product MSDS and Performance sheet. ORDER & SHIPMENT POLICIES: ADULT SIGNATURE REQUIRED FOR DELIVERY Should you wish to purchase a combination of Hazmat devices, as per the order of the U.S. Department of Transportation (DOT), the following pyrotechnic devices may be shipped together, or in any combination thereof: M10 Ball Grenade Marking Device, M11 Multi Bang Device, M12 Distraction Device, M13 Thermobaric Device, M14 Smoke Deployment Device, M15 LARGE Smoke Grenade, Mk5 Thunderflash, Mk7 Thunderflash or Mk9 Diver Recall (each a “Hazmat Device,” collectively “Hazmat Devices”). You may purchase multiple units of hazmat devices in one order and shipment; no more than 27 units per box. Should you wish to purchase more than 27 units of hazmat devices per order, the system will automatically execute a second hazmat/shipping fee in accordance to the U.S. Department of Transportation (DOT) and FedEx regulations. Should you wish to purchase a combination of Hazmat Device(s) with any Non-Hazmat Item(s), you must execute separate orders and shipments in accordance with these terms. Any transaction in violation of these order and shipment policies will not be authorized on the site. These order and shipment policies are drafted in accordance with DOT regulations, in conjunction with FedEx shipping policies. We apologize for any inconvenience. NO SHIPPING TO P.O. BOXES FOR HAZMAT GOODS NO SHIPPING TO: Alaska or Hawaii NO RETURNS ON ANY HAZMAT PRODUCTS These will always show as out of stock. Please call for ordering. Individual units – 37.99 Case (27 units) – Please call Pallet – (20-40 cases)(mixed products are acceptable) Please call 239-944-8300

Benchmade Personal Safety Cutter

Brian — Wed, 26 Mar 2025 17:35:21 +0000

The Multipurpose Multitool cuts quickly and reliably in an emergency situation. All of our safety cutters are made alongside our knives in the U.S.A. Model 8's longer handle provides greater reach and leverage. MOLLE® compatible.

Benchmade SOCP Rescue Tool

Brian — Wed, 26 Mar 2025 17:09:25 +0000

The Benchmade SOCP Rescue Tool, designed by the creator of the Special Operations Combatives Program (SOCP), is a variation of the original Greg Thompson SOCP Dagger. It is intended for rescue performance and less-than-lethal self-defense. This efficient rescue hook design features a fixed 440C blade hook of high-chromium stainless steel with balanced hardness and corrosion resistance, which accommodates a fine edge that is fairly easy to re-sharpen. Additional features include a carbide glass breaker, oxygen wrench, grey coated single-piece handle with finger loop, and black Injection molded plastic sheath with lanyard hole and dip-coated clip.