Blue Force Gear MARCO® Dispenser

The MARCO light sticks dispenser deploys a light for marking stick systems that Night Vision Devices use with no prep time needed.
FEATURES

Gone are the days of 100mph tape, 550 cord, and the frustration of your marking light bundles. Envisioned after many wasted hours of prepping traditional 4” and 6″ chem lights, the MARCO® Marking Light Dispenser is an incredibly efficient and compact way to carry marking sticks for room clearing and many other applications. These disposable marking light stick dispensers take seconds to prep, rip open the foil packaging and slap the MARCO dispenser into the belt, MOLLE or Kydex carrying pouch.

The 2” marking lights put out the same light under night vision devices as taped up 4” or 6″ chem lights and is designed to prevent accidental breaks and glow. The MARCO is preloaded with 30 – 2″ marking lights that give roughly the same lumen output as a taped up 4″ traditional chem sticks in a package smaller than a standard M4 STANAG mag.

The MARCO is perfect for nighttime or low-level light tactical training – drop them in a line to create a visible firing line and drop one under each target to an approximate target location.

IMPORTANT: Keep in original wrap until ready to use. Do not puncture or cut the product. Marking Lights begin degrading once removed from the wrapper. Ingredients are non-toxic and non-flammable but may cause temporary discomfort. In case of skin or eye contact rinse toughly with water. Do not drink or ingest contents. After use, dispose of in a refuse container. Not for use by children 12 years or younger.

**Carrier Pouch Not Included.**
The carrying pouch is not included with the purchase of MARCO® and is sold separately. See below for carrier options.

MARCO Carrier Pouch Options

The Marco Pouch is available for belt use, a MOLLE attachment system and a Kydex Pouch to carry. There is the Helium Whisper® Ten-Speed® Pouch for MARCO® Dispenser, Ten-Speed® Belt Pouch Hanger for MARCO® and Kydex Pouch for MARCO® Dispenser.

MARCO Deployment Instructions:

1) PUSH
Push Marking Stick Light Marco
USING YOUR THUMB, PUSH ONE (1) MARKING STICK FORWARD SO THAT IT PROTRUDES OUT OF THE HOLE

2) GLOW
Glow Marking Stick Light Marco
LIFT ON THE PROTRUDING MARKING STICK UP UNTIL IT ACTIVATES

3) PULL
Pull Marking Stick Light Marco
PULL THE GLOWING MARKING STICK OUT OF THE MARCO AND DEPLOY AS NEEDED

$51.95$65.00

Blue Force Gear MARCO® Dispenser

Description

TECHNOLOGY

Size:

  • 5.33”(H) x 2.33”(W) x 0.73”(D)
  • Packaged: 6” x 3” x .75”

Material:
Injection-Molded Thermoplastic material
2” Marking sticks
​Steel spring

 Downloadable PowerPoint

Downloadable Spec Sheet

Additional information

Color

, , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…